The very best in custom air ride motorcycle suspension kits by Xotic Customs:
5" of total travel (4" below stock and 1" above on typical application)
Limited Lifetime Warranty
Bolts on to any stock Harley with side mount rear suspension (does NOT fit Softails)
Onboard compressor and dump valve lets you adjust to any ride height or stiffness on the fly
All components are waterproof
The normal shocks measure 14” extended and 9.25” deflated
5/32" air lines
Looking to make your ride stand out above the rest? Look no further! The Taildragger Air Ride Suspension Lowering Kit by Xotic Customs is exactly what you need. With nearly 5 inches of total travel you can drop it down low to give your motorcycle that low aggressive look, or just make it easier to maneuver around the garage or parking. Use the onboard compressor to air your suspension part way up for the most comfortable ride you've ever experienced or bump them all the way up for that stiff sporty suspension great for aggressive riding.
This kit comes with the following:
Taildragger Air Ride Shocks x 2
Compressor which can be mounted to your bike and runs off your battery
Switch to lower or raise your shocks
Dump valve to release air from the system
Grade 8 replacement mounting hardware
All necessary wiring and 5/32" air lines
Easy to follow instructions
NOTE: The optional air tank for the Harley-Davidson Touring models does not work with some of the aftermarket Vance & Hines slip-ons. If you need a tank that works with V&H's slip-on's please contact us as we do custom make these.

WARNING:
Although most stock Harley and Indian motorcycles should be able to ride with this system throughout the full range, you should check for any clearance issues before doing so to avoid any possible damage to your bike.

For the V-ROD, you will need to purchase longer bolts and 1/2" spacer for the bottom mounting bracket. Without the additional space,the shock bellow pushes the guard into the pulley. These are NOT supplied with the kit.